Part No. : 11767-10 | Alternate P/N : 1176710 | Manufacturer : 2is inc |
Item Name: clamp loop | NSN: 5340-01-418-3427 (5340014183427) | CAGE Code: 1ZKD0 |
FSC: 5340 Hardware Commercial |
If you require part number 11767-10 from 2Is Inc which is described as a Clamp Loop component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 11767-10 which is listed under the Federal Supply Class 5340 Hardware Commercial. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5340014183427 and was produced under the CAGE Code 1ZKD0. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 11767-10 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 11767-10
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-418-3427 Item Description: Clamp Loop | 5340 | 014183427 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
11767-10 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
ABMZ | DIAMETER | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
ABPX | MATERIAL THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.742 INCHES MINIMUM AND 0.802 INCHES MAXIMUM |
AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.990 INCHES NOMINAL |
BZTN | LOOP INSIDE DIAMETER | 0.625 INCHES NOMINAL |
MATT | MATERIAL | IRON ALLOY 660 BAND |
MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHION |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE BAND |
STYL | STYLE DESIGNATOR | HINGED & CENTER MTD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload