Part No. : 2256-31 | Alternate P/N : 225631 | Manufacturer : abc acquisition company |
Item Name: bearing ball thrust | NSN: 3110-00-275-0241 (3110002750241) | CAGE Code: 00658 |
FSC: 3110 Bearings Antifriction Unmounted |
If you require part number 2256-31 from Abc Acquisition Company which is described as a Bearing Ball Thrust component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2256-31 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110002750241 and was produced under the CAGE Code 00658. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2256-31 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 2256-31
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-00-275-0241 Item Description: Bearing Ball Thrust | 3110 | 002750241 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
2256-31 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABKW | OVERALL HEIGHT | 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM |
ABXV | BORE DIAMETER | 2.0625 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | MOLDED |
AGZA | ALIGNMENT TYPE | RIGID |
AGZQ | THRUST DIRECTIONAL CAPABILITY DESIGNATION | SINGLE |
FEAT | SPECIAL FEATURES | LUBRICATION NOTCH CUT IN ID OF SMALL WASHER,WASHERS OVERLAP,BANDED OD |
MATT | MATERIAL | COPPER ALLOY RETAINER |
MATT | MATERIAL | STEEL BALL |
MATT | MATERIAL | STEEL BAND |
MATT | MATERIAL | STEEL WASHER |
STYL | STYLE DESIGNATOR | CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload