Part No. : 2481789 | Manufacturer : ace g and m of texas inc | Item Name: shaft shouldered |
NSN: 3040-00-891-1897 (3040008911897) | CAGE Code: 5U074 | FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 2481789 from Ace G And M Of Texas Inc which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2481789 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040008911897 and was produced under the CAGE Code 5U074. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2481789 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 2481789
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-00-891-1897 Item Description: Shaft Shouldered | 3040 | 008911897 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
2481789 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
AAHN | END SIMILARITY | NOT IDENTICAL |
AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
ABHP | OVERALL LENGTH | 2.460 INCHES MINIMUM AND 2.480 INCHES MAXIMUM |
AGAV | END ITEM IDENTIFICATION | T-38 ACFT |
AMDL | FIRST END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
AMDM | FIRST END SPLINE LENGTH | 0.650 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
AMDN | FIRST END SPLINE MINOR DIAMETER | 0.5000 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM |
AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
AMDS | FIRST END PITCH DIAMETER | 0.6000 INCHES NOMINAL |
AMFZ | SECOND END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
AMGA | SECOND END SPLINE LENGTH | 0.850 INCHES MINIMUM AND 0.870 INCHES MAXIMUM |
AMGB | SECOND END SPLINE MINOR DIAMETER | 0.4800 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
AMGE | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
AMGF | SECOND END PITCH DIAMETER | 0.6000 INCHES NOMINAL |
ATPC | STEP QUANTITY | 7 |
BDSQ | FIRST END SPLINE QUANTITY | 12 |
BDSR | SECOND END SPLINE QUANTITY | 12 |
CSPY | LARGEST STEP DIAMETER | 0.830 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
MATT | MATERIAL | STEEL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload