Part No. : 597-146 | Alternate P/N : 597146 | Manufacturer : american coleman company the |
Item Name: shaft axle automotive | NSN: 2520-01-010-9841 (2520010109841) | CAGE Code: 96606 |
FSC: 2520 Vehicle Power Transmission Components |
If you require part number 597-146 from American Coleman Company The which is described as a Shaft Axle Automotive component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 597-146 which is listed under the Federal Supply Class 2520 Vehicle Power Transmission Components. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2520010109841 and was produced under the CAGE Code 96606. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 597-146 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 597-146
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2520-01-010-9841 Item Description: Shaft Axle Automotive | 2520 | 010109841 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
597-146 | 5 | 9 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
BBCF | SECOND END SPLINE QUANTITY | 19 |
BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
BNTM | SECOND END SPLINE TYPE | STRAIGHT |
BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
BNYS | FLANGE OVERALL THICKNESS | 0.617 INCHES NOMINAL |
BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.437 INCHES NOMINAL |
MATT | III MATERIAL | STEEL COMP 4150 |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 4150 ASSN STD SINGLE MATERIAL RESPONSE |
ABHP | OVERALL LENGTH | 34.797 INCHES NOMINAL |
ABQB | TAPER MAJOR DIAMETER | 0.783 INCHES NOMINAL |
AETC | METALLIC HARDNESS RATING | 55.0 NOMINAL ROCKWELL C |
AHTC | FLANGE OUTSIDE DIAMETER | 6.250 INCHES NOMINAL |
AMGA | SECOND END SPLINE LENGTH | 2.470 INCHES NOMINAL |
AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.775 INCHES NOMINAL |
AMQA | FIRST END TYPE | FLANGED |
AMQF | SECOND END TYPE | SPLINED |
AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 8 TAPERED HOLE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload