Part No. : 70-G-016-MPC14 | Alternate P/N : 70G016MPC14 | Manufacturer : ametek inc |
Item Name: gasket | NSN: 5330-01-134-5827 (5330011345827) | CAGE Code: 53553 |
FSC: 5330 Packing and Gasket Materials |
If you require part number 70-G-016-MPC14 from Ametek Inc which is described as a Gasket component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 70-G-016-MPC14 which is listed under the Federal Supply Class 5330 Packing and Gasket Materials. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5330011345827 and was produced under the CAGE Code 53553. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 70-G-016-MPC14 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 70-G-016-MPC14
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5330-01-134-5827 Item Description: Gasket | 5330 | 011345827 | W | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
70-G-016-Mpc14 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
ABHP | OVERALL LENGTH | 7.158 INCHES MINIMUM AND 7.218 INCHES MAXIMUM |
ABMK | OVERALL WIDTH | 2.845 INCHES MINIMUM AND 2.905 INCHES MAXIMUM |
ADPQ | INSIDE CORNER RADIUS | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
ADPW | OUTSIDE CORNER RADIUS | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
ADUE | APERTURE WIDTH | 2.218 INCHES MINIMUM AND 2.259 INCHES MAXIMUM |
ADUF | APERTURE LENGTH | 5.781 INCHES MINIMUM AND 5.822 INCHES MAXIMUM |
ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
ADVM | CROSS-SECTIONAL THICKNESS | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
AECS | BOLT HOLE QUANTITY | 4 |
CQFM | HARDNESS RATING | 20.0 SHORE DUROMETER A NOMINAL OVERALL |
MATT | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL |
STYL | STYLE DESIGNATOR | NON-CIRCULAR |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload