Part identity
597308
Special Features: Skf axial clamp seals are produced in three different DESIGNS:CT1, CT3, and CT4 design; these axial clamp seals are made of appropriately profiled strips of non-reinforced nitrile rubber which are held firmly in place by stainless steel screw-type clamps; they are available in the diameter range 150 to 4600 mm; the seals do not rotate but seal axially against a rotating counterface; CT3 design:the seals of the CT3 design differ from those of the CT1 design only in the form of the sealing lip; this is again flat but is provided with annular grooves; these serve to trap contaminants which may have started to penetrate the lip/counterface contact; the maximum operating interference for these seals is +4, 8 mm; SHAFT:42.500 in.; OD:43.688 in.; WEIGHT:4.250 lbs III Part Name Assigned By Controlling Agency: Axial clamp seals CT3 design Seal Width: 1.125 inches nominal
Applied Industrial Technologies Inc
Part description
Special Features: Skf axial clamp seals are produced in three different DESIGNS:CT1, CT3, and CT4 design; these axial clamp seals are made of appropriately profiled strips of non-reinforced nitrile rubber which are held firmly in place by stainless steel screw-type clamps; they are available in the diameter range 150 to 4600 mm; the seals do not rotate but seal axially against a rotating counterface; CT3 design:the seals of the CT3 design differ from those of the CT1 design only in the form of the sealing lip; this is again flat but is provided with annular grooves; these serve to trap contaminants which may have started to penetrate the lip/counterface contact; the maximum operating interference for these seals is +4, 8 mm; SHAFT:42.500 in.; OD:43.688 in.; WEIGHT:4.250 lbs III Part Name Assigned By Controlling Agency: Axial clamp seals CT3 design Seal Width: 1.125 inches nominal
ASAP supports this specific part for replacement, spare-pool replenishment, retrofit, and urgent maintenance requirements. Quote requests can include alternate MPN, condition preferences, certification needs, and plant-specific receiving instructions so procurement gets a clear sourcing response before purchase.
Specifications
Certifications & documentation
- UL Recognized
- CE
- C of C available on request
Manufacturer
Applied Industrial Technologies Inc
Authorized-distributor or qualified-aftermarket source. Parts shipped from this manufacturer include full traceability paperwork and counterfeit-mitigation per SAE AS6081.
View manufacturer profile →NSN Information for Part Number 597308 with NSN 5330-01-557-7603, 5330015577603
Characteristics Data of NSN 5330-01-557-7603, 5330015577603
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | SKF AXIAL CLAMP SEALS ARE PRODUCED IN THREE DIFFERENT DESIGNS:CT1, CT3, AND CT4 DESIGN; THESE AXIAL CLAMP SEALS ARE MADE OF APPROPRIATELY PROFILED STRIPS OF NON-REINFORCED NITRILE RUBBER WHICH ARE HELD FIRMLY IN PLACE BY STAINLESS STEEL SCREW-TYPE CLAMPS; THEY ARE AVAILABLE IN THE DIAMETER RANGE 150 TO 4600 MM; THE SEALS DO NOT ROTATE BUT SEAL AXIALLY AGAINST A ROTATING COUNTERFACE; CT3 DESIGN:THE SEALS OF THE CT3 DESIGN DIFFER FROM THOSE OF THE CT1 DESIGN ONLY IN THE FORM OF THE SEALING LIP; THIS IS AGAIN FLAT BUT IS PROVIDED WITH ANNULAR GROOVES; THESE SERVE TO TRAP CONTAMINANTS WHICH MAY HAVE STARTED TO PENETRATE THE LIP/COUNTERFACE CONTACT; THE MAXIMUM OPERATING INTERFERENCE FOR THESE SEALS IS +4,8 MM; SHAFT:42.500 IN.; OD:43.688 IN.; WEIGHT:4.250 LBS |
| CPCW | Housing Bore Diameter | 0.937 INCHES NOMINAL |
| CXCY | Part Name Assigned By Controlling Agency | AXIAL CLAMP SEALS CT3 DESIGN |
| MRC | Decoded Requirement | Clear Text Reply |
| ADUC | Seal Width | 1.125 INCHES NOMINAL |