T44-X45 by Barry Wright Corporation With NSN 5342-01-338-8561

Part No. : T44-X45	Alternate P/N : T44X45	Manufacturer : barry wright corporation
Item Name: mount resilient weapon system	NSN: 5342-01-338-8561 (5342013388561)	CAGE Code: 81860
FSC: 5342 Hardware Weapon System

If you require part number T44-X45 from Barry Wright Corporation which is described as a Mount Resilient Weapon System component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number T44-X45 which is listed under the Federal Supply Class 5342 Hardware Weapon System. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5342013388561 and was produced under the CAGE Code 81860. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part T44-X45 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for T44-X45

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number T44-X45 with NSN 5342-01-338-8561, 5342-01-338-8561

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5342-01-338-8561 Item PartTypeName: MOUNT,RESILIENT,WEAPON SYSTEM	5342	013388561	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
T44-X45	6	2	3

Characteristics Data of NSN 5342-01-338-8561, 5342013388561

MRC	Criteria	Characteristic
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AISI 302 ASSN STD SINGLE MATERIAL RESPONSE BASE PLATE
BXCQ	FLANGE MOUNTING HOLE DIAMETER	0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE CORE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE CUP
ABUJ	THREAD SIZE	0.250-28 ALL THREADED PORTIONS
AFQM	DISTANCE BETWEEN MOUNTING HOLE CENTERS	1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM
AFQN	FLANGE LENGTH	1.780 INCHES MINIMUM AND 1.840 INCHES MAXIMUM
AGFF	FLANGE WIDTH	1.780 INCHES MINIMUM AND 1.840 INCHES MAXIMUM
BXCH	SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS	1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM
HGTH	HEIGHT	2.590 INCHES NOMINAL
MATT	MATERIAL	COPPER ALLOY OVERALL
MATT	MATERIAL	STEEL BASE PLATE
MATT	MATERIAL	STEEL CUP
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AISI 302 ASSN STD SINGLE MATERIAL RESPONSE CORE
SFTT	SURFACE TREATMENT	NICKEL OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE CORE
SFTT	SURFACE TREATMENT	PASSIVATE CUP
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-N-290,CLASS 1,TYPE 7 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BASE PLATE
STYL	STYLE DESIGNATOR	ROUND FOUR-HOLE FLANGE
ABKU	FLANGE THICKNESS	0.110 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
MATT	MATERIAL	STEEL CORE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AISI 302 ASSN STD SINGLE MATERIAL RESPONSE CUP
SFTT	SURFACE TREATMENT	PASSIVATE BASE PLATE

Related NSN Componets for T44-X45

Part T44-X45 With Different Manufacturers

T44-X45

RFQ

If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.

Upload

We are proud to supply every branch of the United States military

Top NSN Parts

view all

Leading NSN Parts Manufacturer