Part No. : 3MFRA585-39 | Alternate P/N : 3MFRA58539 | Manufacturer : boeing company the |
Item Name: screw close tolerance | NSN: 5305-00-101-5708 (5305001015708) | CAGE Code: 76301 |
FSC: 5305 Screws |
If you require part number 3MFRA585-39 from Boeing Company The which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3MFRA585-39 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305001015708 and was produced under the CAGE Code 76301. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3MFRA585-39 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3MFRA585-39
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-101-5708 Item Description: Screw Close Tolerance | 5305 | 001015708 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3mfra585-39 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.448 INCHES MINIMUM |
AASB | FASTENER LENGTH | 2.952 INCHES MINIMUM AND 2.999 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.6287 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
ANEE | GRIP LENGTH | 2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 24 |
CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
CSYM | SURFACE FINISH | 125.0 MICROINCHES TOP OF HEAD |
CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
FEAT | SPECIAL FEATURES | PRIMER COAT APPLIED TO HEAD |
MATT | MATERIAL | STEEL OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload