Part No. : 3M1262D3-5-5 | Alternate P/N : 3M1262D355 | Manufacturer : boeing company the |
Item Name: screw close tolerance | NSN: 5305-01-417-3839 (5305014173839) | CAGE Code: 76301 |
FSC: 5305 Screws |
If you require part number 3M1262D3-5-5 from Boeing Company The which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3M1262D3-5-5 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014173839 and was produced under the CAGE Code 76301. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3M1262D3-5-5 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3M1262D3-5-5
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-417-3839 Item Description: Screw Close Tolerance | 5305 | 014173839 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3m1262d3-5-5 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.313 INCHES NOMINAL |
AASB | FASTENER LENGTH | 0.611 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.293 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.049 INCHES NOMINAL |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
AAWU | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 32 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload