Part No. : 729D | Manufacturer : dana commercial vehicle products | Item Name: setscrew |
NSN: 5305-00-270-7339 (5305002707339) | CAGE Code: 72447 | FSC: 5305 Screws |
If you require part number 729D from Dana Commercial Vehicle Products which is described as a Setscrew component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 729D which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305002707339 and was produced under the CAGE Code 72447. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 729D today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 729D
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-270-7339 Item Description: Setscrew | 5305 | 002707339 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
729d | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.468 INCHES MINIMUM |
AASB | FASTENER LENGTH | 0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM |
AASK | HEAD STYLE | SQUARE |
AASU | HEAD HEIGHT | 0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM |
AATB | WIDTH BETWEEN FLATS | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
AAUB | HOLE DIAMETER | 0.078 INCHES NOMINAL |
AAUY | POINT LENGTH | 0.156 INCHES NOMINAL |
ABQJ | POINT STYLE | FLAT |
ABQZ | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE |
AHYM | NOMINAL THREAD DIAMETER | 0.438 INCHES |
ASXK | HOLE QUANTITY | 1 |
BQDM | HOLE TYPE | DRILLED |
CMLP | THREAD QUANTITY PER INCH | 20 |
CRHC | HOLE CONFIGURATION STYLE | SQUARE LONGITUDINAL HOLE |
CWDK | POINT CHAMFER ANGLE | 60.0 DEGREES NOMINAL |
MATT | MATERIAL | STEEL COMP 1018 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 4063 OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload