Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : DG4-394E-IS | Alternate P/N : DG4394EIS | Manufacturer : electron products inc |
| Item Name: capacitor fixed metallized paper | NSN: 5910-00-724-4425 (5910007244425) | CAGE Code: 99515 |
| FSC: 5910 Capacitors |
If you require part number DG4-394E-IS from Electron Products Inc which is described as a Capacitor Fixed Metallized Paper component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number DG4-394E-IS which is listed under the Federal Supply Class 5910 Capacitors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5910007244425 and was produced under the CAGE Code 99515. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part DG4-394E-IS today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-00-724-4425 Item PartTypeName: CAPACITOR,FIXED,METALLIZED,PAPER | 5910 | 007244425 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| DG4-394E-5 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | W/O MTG FACILITIES,TERMINALS ON OPPOSITE SURFACES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 1.500 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.140 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.420 INCHES NOMINAL |
| AEBT | TERMINAL DIAMETER | 0.032 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE S) |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.390 MICROFARADS SINGLE SECTION |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 400.0 DC SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| CWJK | CASE MATERIAL | METAL |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHM-MICROFARADS |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| TEST | TEST DATA DOCUMENT | 78626-30270-11 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| ADAT | BODY WIDTH | 0.590 INCHES NOMINAL |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -6.0 TO 6.0 SINGLE SECTION |
| CWSZ | CASE INSULATION MATERIAL | PAPER |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions