Part No. : ST3N455-5L10-1 | Alternate P/N : ST3N4555L101 | Manufacturer : emhart teknologies inc |
Item Name: screw close tolerance | NSN: 5305-00-395-3391 (5305003953391) | CAGE Code: 58998 |
FSC: 5305 Screws |
If you require part number ST3N455-5L10-1 from Emhart Teknologies Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ST3N455-5L10-1 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305003953391 and was produced under the CAGE Code 58998. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ST3N455-5L10-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. ST3N455-5L10-1
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-395-3391 Item Description: Screw Close Tolerance | 5305 | 003953391 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
St3n455-5l10-1 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
AGAV | END ITEM IDENTIFICATION | AIRCRAFT, EAGLE F-15 |
AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 24 |
CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload