Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : ES3-DWG-1770 | Alternate P/N : ES3DWG1770 | Manufacturer : es3 prime logistics group inc |
| Item Name: shaft shouldered | NSN: 3040-01-125-6924 (3040011256924) | CAGE Code: 6LKA3 |
| FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number ES3-DWG-1770 from Es3 Prime Logistics Group Inc which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ES3-DWG-1770 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040011256924 and was produced under the CAGE Code 6LKA3. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ES3-DWG-1770 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-01-125-6924 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 011256924 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 65265-02012-101 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CROSS DRILLED HOLE AND SPLINED STRAIGHT) |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | CROSS DRILLED HOLE AND SPLINED STRAIGHT) |
| ABHP | OVERALL LENGTH | 25.630 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 1.181 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.9100 INCHES MINIMUM AND 0.9200 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.0365 INCHES MINIMUM AND 1.0390 INCHES MAXIMUM |
| AMDX | FIRST END HOLE DIAMETER | 0.1360 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 1.250 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 5 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSPY | LARGEST STEP DIAMETER | 1.122 INCHES MINIMUM AND 1.123 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | FLIGHT SAFETY CRITICAL |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions