Part identity
30444-0019
Tensiometer Dial In
General Engineering Works
Avg quote: 14 minFulfilled from Anaheim, CAAS9120:2025 · ISO 9001 · FAA AC 00-56BC of C, lot & date code with every line
Part description
Tensiometer Dial In
ASAP supports this specific part for replacement, spare-pool replenishment, retrofit, and urgent maintenance requirements. Quote requests can include alternate MPN, condition preferences, certification needs, and plant-specific receiving instructions so procurement gets a clear sourcing response before purchase.
Specifications
Certifications & documentation
- UL Recognized
- CE
- C of C available on request
GE
Manufacturer
General Engineering Works
Authorized-distributor or qualified-aftermarket source. Parts shipped from this manufacturer include full traceability paperwork and counterfeit-mitigation per SAE AS6081.
View manufacturer profile →Characteristics Data of NSN 6635-01-458-1290, 6635014581290
| MRC | Criteria | Characteristic |
|---|---|---|
| BHHY | DEFLECTION ANGLE ADJUSTER | NOT INCLUDED |
| AFJU | CARRYING CASE | NOT PROVIDED |
| APSK | SCALE RANGE | 0.0 TO 1000.0 POUNDS |
| AXGY | MOUNTING METHOD | BRACKET |
| FEAT | SPECIAL FEATURES | A PRECISION DIAL INDICATOR IS MOUNTED AT THE NULL POINT OF THE DEFLECTION BEAM; THE POINTER REVOLVES 360 DEGREES CLOCKWISE UNDER COMPRESSION OR TENSION FORCES; ACCIDENTAL OVERLOADS UP TO 30 PERCENT OF CAPACITY CAN BE SAFELY SUSTAINED WITHOUT INJURY TO THE DIAL INDICATOR OR DEFLECTION BEAM; ALL CAPACITIES FEATURE A 5:1 DESIGN SAFETY FACTOR; MAY BE MOUNTED HORIZONTALLY, VERTICALLY OR FLAT; THE BAKED ENAMEL FINISH RESISTS CORROSION AND RUST; ACCURACY OF +/- ONE PERCENT OF FULL CAPACITY; DIAL DIVISION 10 LBS INCREMENTS |
| APSJ | SCALE QUANTITY | 1 |
| BHHW | MATERIAL ACCOMMODATED DIAMETER | 0.500 INCHES NOMINAL |
| ASPX | SCALE NAME | COMPRESSION |
| FTLD | III FUNCTIONAL DESCRIPTION | LOAD IS APPLIED AGAINST A HARDENED BALL WHICH ROTATES TO MAINTAIN VERTICAL ALIGNMENT AS PRESSURE INCREASES; THE BALL IS HELD IN PLACE WITH A SPRING CLIP; THE THREADED MOUNTING HOLE IS LOCATE OPPOSITE THE LOADING BALL IN THE BOTTOM OF THE BEAM |
| AMKD | INDICATOR TYPE | DIAL |
| BGTX | TEMPERATURE COMPENSATOR | NOT INCLUDED |
| AGAV | III END ITEM IDENTIFICATION | PACER DAWN |