Part No. : AN6-12 | Alternate P/N : AN612 | Manufacturer : gfc industries inc |
Item Name: bolt machine | NSN: 5306-00-151-1339 (5306001511339) | CAGE Code: 9M264 |
FSC: 5306 Bolts |
If you require part number AN6-12 from Gfc Industries Inc which is described as a Bolt Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number AN6-12 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306001511339 and was produced under the CAGE Code 9M264. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part AN6-12 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. AN6-12
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-00-151-1339 Item Description: Bolt Machine | 5306 | 001511339 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
An6-12 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
MACHINE | AAJD | THREAD CLASS3A |
MACHINE | AAJF | THREAD DIRECTIONRIGHT-HAND |
MACHINE | AASA | THREAD LENGTH0 608 INCHES MINIMUM AND 0 687 INCHES MAXIMUM |
MACHINE | AASB | FASTENER LENGTH1 312 INCHES MINIMUM AND 1 359 INCHES MAXIMUM |
MACHINE | AASK | HEAD STYLEHEXAGON |
MACHINE | AASU | HEAD HEIGHT0 203 INCHES MINIMUM AND 0 235 INCHES MAXIMUM |
MACHINE | AATB | WIDTH BETWEEN FLATS0 553 INCHES MINIMUM AND 0 565 INCHES MAXIMUM |
MACHINE | AAWB | SHANK UNTHREADED HOLE DIAMETER0 106 INCHES MINIMUM FIRST HOLE AND 0 116 INCHES MAXIMUM FIRST HOLE |
MACHINE | AHYM | NOMINAL THREAD DIAMETER0 375 INCHES |
MACHINE | ANEE | GRIP LENGTH0 672 INCHES MINIMUM AND 0 704 INCHES MAXIMUM |
MACHINE | CBBL | FEATURES PROVIDEDFINISHED HEAD |
MACHINE | CMLP | THREAD QUANTITY PER INCH24 |
MACHINE | CQBC | MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH |
MACHINE | CQFM | HARDNESS RATING26 0 ROCKWELL C MINIMUM OVERALL AND 32 0 ROCKWELL C MAXIMUM OVERALL |
MACHINE | CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1 250 INCHES NOMINAL FIRST HOLE |
MACHINE | MATT | MATERIALSTEEL COMP 4037 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4140 OVERALL |
MACHINE | MDCL | MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-6812 MIL SPEC ALL MATERIAL RESPONSES OVERALL |
MACHINE | SFTT | SURFACE TREATMENTCADMIUM OVERALL |
MACHINE | STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416TY 1CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
MACHINE | THSD | THREAD SERIES DESIGNATORUNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload