Part No. : L30-25-M-FF-180-S1-O-H | Alternate P/N : L3025MFF180S1OH | Manufacturer : helac corporation |
Item Name: actuator hydraulic pneumatic rot | NSN: 4810-01-600-2863 (4810016002863) | CAGE Code: 63866 |
FSC: 4810 Valves Powered |
If you require part number L30-25-M-FF-180-S1-O-H from Helac Corporation which is described as a Actuator Hydraulic Pneumatic Rot component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number L30-25-M-FF-180-S1-O-H which is listed under the Federal Supply Class 4810 Valves Powered. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4810016002863 and was produced under the CAGE Code 63866. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part L30-25-M-FF-180-S1-O-H today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. L30-25-M-FF-180-S1-O-H
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
4810-01-600-2863 Item Description: ACTUATOR,HYDRAULIC-PNEUMATIC,ROT | 4810 | 016002863 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
L30-25-M-FF-180-S1-O-H | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
ABHE | OUTSIDE DIAMETER | 6.000 INCHES NOMINAL ALL PORTS |
ABKW | OVERALL HEIGHT | 7.300 INCHES NOMINAL |
ABMK | OVERALL WIDTH | 10.600 INCHES NOMINAL |
AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
AWQM | OUTPUT DRIVE TORQUE RATING | 25000.0 INCH-POUNDS |
BGST | PRESSURE RATING | 62500.0 POUNDS PER SQUARE INCH MAXIMUM |
BLFW | ROTATION IN DEG | 180.0 |
CKRM | INTEGRAL VALVE OPERATION METHOD | HYDRAULIC OR PNEUMATIC |
CKSD | DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
CLML | MOUNTING TYPE AND LOCATION | FLANGE CYLINDER HEAD END |
CLMQ | MOUNTING FACILITY DIAMETER | 8.100 INCHES NOMINAL |
FEAT | SPECIAL FEATURES | MAX RADIAL CAPACITY:5000.0 POUNDS;MAX THRUST CAPACITY:4000.0 POUNDS;DISPLACEMENT:42.000 CUBIC INCHES;APPROXIMATE WEIGHT:110.0 POUNDS;LENGTH NON-ROTATING:11.3 INCHES NOMINAL;DIAMETER SHAFT AND ENDCAP FLANGES:6.1 INCHES;DIAMETER BOLT CIRCLE:5 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload