Part No. : S010-004-0405 | Alternate P/N : S0100040405 | Manufacturer : interstate electronics corporation |
Item Name: screw machine | NSN: 5305-00-137-3273 (5305001373273) | CAGE Code: 07421 |
FSC: 5305 Screws |
If you require part number S010-004-0405 from Interstate Electronics Corporation which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number S010-004-0405 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305001373273 and was produced under the CAGE Code 07421. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part S010-004-0405 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. S010-004-0405
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.183 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
CMLP | THREAD QUANTITY PER INCH | 40 |
CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE |
FEAT | SPECIAL FEATURES | FURNISH ONE SILICONE RUBBER O RING,BEARING SURFACE HEAD UNDERCUT FOR O RING |
THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload