Part No. : 200XP85 | Manufacturer : lighting components and design | Item Name: lampholder |
NSN: 6250-00-109-1061 (6250001091061) | CAGE Code: 95263 | FSC: 6250 Ballasts Lampholders and Starters |
If you require part number 200XP85 from Lighting Components And Design which is described as a Lampholder component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 200XP85 which is listed under the Federal Supply Class 6250 Ballasts Lampholders and Starters. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 6250001091061 and was produced under the CAGE Code 95263. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 200XP85 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 200XP85
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
6250-00-109-1061 Item Description: Lampholder | 6250 | 001091061 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
200xp85 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAFZ | BODY MATERIAL | PLASTIC |
AALY | MOUNTING MATERIAL | STEEL |
AARA | TERMINAL QUANTITY | 1 |
AARB | TERMINAL TYPE | WIRE LEAD |
ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | NOT RATED |
ABGL | WIDTH | 0.312 INCHES NOMINAL |
ABJL | WATTAGE RATING IN WATTS | 75.0 |
ABKV | OUTSIDE DIAMETER | 0.406 INCHES NOMINAL |
ABKW | OVERALL HEIGHT | 0.687 INCHES NOMINAL |
ACUP | MOUNTING DEVICE QUANTITY | 1 |
ADJH | MOUNTING METHOD | BRACKET |
AEUG | SHELL MATERIAL | STEEL |
AEUJ | LAMP BASE TYPE ACCOMMODATED | MINIATURE BAYONET |
AHGJ | MOUNTING FEATURE TYPE | SURFACE |
AHHZ | WIRING PROVISION LENGTH | 36.000 INCHES NOMINAL |
AKQJ | CENTER TO CENTER DISTANCE BETWEEN BRACKET MOUNTING HOLES | 0.875 NOMINAL INCHES |
AKQK | BRACKET MOUNTING HOLE DIAMETER | 0.144 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload