Part identity
0098-LL-TJ2-2612
Hose Assembly Nonme
Military Standards Promulgated By Military Departments Under Authority Of Defens
Part description
Hose Assembly Nonme
ASAP supports this specific part for replacement, spare-pool replenishment, retrofit, and urgent maintenance requirements. Quote requests can include alternate MPN, condition preferences, certification needs, and plant-specific receiving instructions so procurement gets a clear sourcing response before purchase.
Specifications
Certifications & documentation
- UL Recognized
- CE
- C of C available on request
Manufacturer
Military Standards Promulgated By Military Departments Under Authority Of Defens
Authorized-distributor or qualified-aftermarket source. Parts shipped from this manufacturer include full traceability paperwork and counterfeit-mitigation per SAE AS6081.
View manufacturer profile →NSN Information for Part Number 0098-LL-TJ2-2612 with NSN 4720-01-211-1996, 4720012111996
Characteristics Data of NSN 4720-01-211-1996, 4720012111996
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.851 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 1.078 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT,GASKET SEAL 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT,GASKET SEAL 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL HOSE 2ND END |
| CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER BRAIDED STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.375 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.375 INCHES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 5.700 INCHES NOMINAL WORKING |
| THSD | THREAD SERIES DESIGNATOR | UNEF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNEF 2ND END |