Part No. : 70D44178B02 | Manufacturer : motorola automotive electronics | Item Name: generator engine accessory |
NSN: 2920-00-008-7272 (2920000087272) | CAGE Code: 31211 | FSC: 2920 Engine Electrical System Components Nonaircraft |
If you require part number 70D44178B02 from Motorola Automotive Electronics which is described as a Generator Engine Accessory component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 70D44178B02 which is listed under the Federal Supply Class 2920 Engine Electrical System Components Nonaircraft. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2920000087272 and was produced under the CAGE Code 31211. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 70D44178B02 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 70D44178B02
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2920-00-008-7272 Item Description: Generator Engine Accessory | 2920 | 000087272 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
70d44178b02 | C | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
ELEC | VOLTAGE IN VOLTS | 12.0 |
CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
AXHX | GROUND POLARITY TYPE | NEGATIVE |
ADER | MOUNTING STYLE | FLANGE MTD W/TWO MTG HOLES, TOP HOLE THREADED |
BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.280 INCHES NOMINAL |
BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
AAJF | THREAD DIRECTION | RIGHT-HAND |
BCGM | RECTIFIER LOCATION | INTEGRAL |
BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.240 INCHES NOMINAL |
BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
CMLL | MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
CMLN | MOUNTING HOLE THREAD CLASS | 2B |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload