Part No. : NASM35190-MS35190-285 | Alternate P/N : NASM35190MS35190285 | Manufacturer : national aerospace standards |
Item Name: screw machine | NSN: 5305-00-957-6649 (5305009576649) | CAGE Code: 80205 |
FSC: 5305 Screws |
If you require part number NASM35190-MS35190-285 from National Aerospace Standards which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NASM35190-MS35190-285 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305009576649 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NASM35190-MS35190-285 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NASM35190-MS35190-285
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-957-6649 Item Description: Screw Machine | 5305 | 009576649 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Nasm35190-Ms35190-285 | 1 | 1 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.275 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.375 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
AASL | HEAD DIAMETER | 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.092 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
CMLP | THREAD QUANTITY PER INCH | 20 |
CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
CYAU | SCREW MATERIAL | STEEL |
CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE |
CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
THSD | THREAD SERIES DESIGNATOR | UNC |
ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 2C STYLE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload