Part No. : NAS1153E7 | Manufacturer : national aerospace standards | Item Name: screw close tolerance |
NSN: 5305-01-105-9375 (5305011059375) | CAGE Code: 80205 | FSC: 5305 Screws |
If you require part number NAS1153E7 from National Aerospace Standards which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1153E7 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305011059375 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1153E7 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NAS1153E7
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-105-9375 Item Description: Screw Close Tolerance | 5305 | 011059375 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Nas1153e7 | 5 | 1 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.291 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.699 INCHES MINIMUM AND 0.729 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | TORQUE-SET RIBBED |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
MATT | MATERIAL | IRON ALLOY 660 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1153 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload