Part No. : NAS1351-10H20P | Alternate P/N : NAS135110H20P | Manufacturer : national aerospace standards |
Item Name: screw cap socket head | NSN: 5305-01-580-1774 (5305015801774) | CAGE Code: 80205 |
FSC: 5305 Screws |
If you require part number NAS1351-10H20P from National Aerospace Standards which is described as a Screw Cap Socket Head component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1351-10H20P which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015801774 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1351-10H20P today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NAS1351-10H20P
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-580-1774 Item Description: Screw Cap Socket Head | 5305 | 015801774 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Nas1351-10h20p | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AASK | Head Style | FLAT CHAMFER |
SFTT | Surface Treatment | CADMIUM OVERALL AND CHROMATE OVERALL |
MATT | Material | STEEL OVERALL |
ASXK | Hole Quantity | 6 |
MRC | Decoded Requirement | Clear Text Reply |
BQDM | Hole Type | DRILLED |
CQBC | Minimum Tensile Strength | 170000 POUNDS PER SQUARE INCH |
AASB | Fastener Length | 1.250 INCHES NOMINAL |
ABQZ | Internal Drive Style | HEXAGON |
AAJF | Thread Direction | RIGHT-HAND |
AHYM | Nominal Thread Diameter | 0.625 INCHES |
AASL | Head Diameter | 0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
THSD | Thread Series Designator | UNRF |
CMLP | Thread Quantity Per Inch | 18 |
AAUB | Hole Diameter | 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
AASA | Thread Length | 1.250 INCHES NOMINAL |
AAJD | Thread Class | 3A |
ASDB | Width Across Flats | 0.500 INCHES NOMINAL |
AASU | Head Height | 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload