Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 938-062-1201 | Alternate P/N : 9380621201 | Manufacturer : northrop grumman systems corporation |
| Item Name: resistor variable wire wound non | NSN: 5905-00-130-9030 (5905001309030) | CAGE Code: 95542 |
| FSC: 5905 Resistors |
If you require part number 938-062-1201 from Northrop Grumman Systems Corporation which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 938-062-1201 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905001309030 and was produced under the CAGE Code 95542. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 938-062-1201 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-130-9030 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 001309030 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3250L501-201 | B | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ABTD | MOUNTING SLOT WIDTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.034 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | UPPER ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | SLOT |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 200.0 OHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions