Part No. : S12-10-3031 | Alternate P/N : S12103031 | Manufacturer : sikorsky aircraft corp |
Item Name: nut plain round | NSN: 5310-00-637-1009 (5310006371009) | CAGE Code: 78286 |
FSC: 5310 Nuts and Washers |
If you require part number S12-10-3031 from Sikorsky Aircraft Corp which is described as a Nut Plain Round component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number S12-10-3031 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310006371009 and was produced under the CAGE Code 78286. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part S12-10-3031 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. S12-10-3031
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-637-1009 Item Description: NUT,PLAIN,ROUND | 5310 | 006371009 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
S12-10-3031 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3B |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AAWY | COUNTERBORE DIAMETER | 2.9743 INCHES MINIMUM NUT AND 2.9943 INCHES MAXIMUM NUT |
ABQU | DRIVE POINT DEPTH | 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
ACTA | NUT STYLE | ROUND |
ACTD | NUT DIAMETER | 3.984 INCHES MINIMUM AND 4.016 INCHES MAXIMUM |
ADBG | NUT THICKNESS | 0.578 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
ADBH | DRIVE POINT WIDTH | 0.359 NOMINAL MILS AND 0.391 NOMINAL CENTIMETERS |
ADBM | DRIVE POINT QUANTITY | 8 |
ADFK | NUT COUNTERBORE DEPTH | 0.062 INCHES MINIMUM NUT AND 0.125 INCHES MAXIMUM NUT |
BZRR | THREAD SERIES | UNS |
CMLP | THREAD QUANTITY PER INCH | 18 |
CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
CQJX | NOMINAL THREAD SIZE | 2.750 INCHES |
CRSQ | COUNTERSINK ANGLE | 89.5 DEGREES MINIMUM NUT AND 90.5 DEGREES MAXIMUM NUT |
MATT | MATERIAL | STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload