Part identity
CR597308
Seal Plain
Skf Bearing Supplies Pty Ltd
Avg quote: 14 minFulfilled from Anaheim, CAAS9120:2025 · ISO 9001 · FAA AC 00-56BC of C, lot & date code with every line
Part description
Seal Plain
ASAP supports this specific part for replacement, spare-pool replenishment, retrofit, and urgent maintenance requirements. Quote requests can include alternate MPN, condition preferences, certification needs, and plant-specific receiving instructions so procurement gets a clear sourcing response before purchase.
Specifications
Certifications & documentation
- UL Recognized
- CE
- C of C available on request
SB
Manufacturer
Skf Bearing Supplies Pty Ltd
Authorized-distributor or qualified-aftermarket source. Parts shipped from this manufacturer include full traceability paperwork and counterfeit-mitigation per SAE AS6081.
View manufacturer profile →Characteristics Data of NSN 5330-01-557-7603, 5330015577603
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | SKF AXIAL CLAMP SEALS ARE PRODUCED IN THREE DIFFERENT DESIGNS:CT1, CT3, AND CT4 DESIGN; THESE AXIAL CLAMP SEALS ARE MADE OF APPROPRIATELY PROFILED STRIPS OF NON-REINFORCED NITRILE RUBBER WHICH ARE HELD FIRMLY IN PLACE BY STAINLESS STEEL SCREW-TYPE CLAMPS; THEY ARE AVAILABLE IN THE DIAMETER RANGE 150 TO 4600 MM; THE SEALS DO NOT ROTATE BUT SEAL AXIALLY AGAINST A ROTATING COUNTERFACE; CT3 DESIGN:THE SEALS OF THE CT3 DESIGN DIFFER FROM THOSE OF THE CT1 DESIGN ONLY IN THE FORM OF THE SEALING LIP; THIS IS AGAIN FLAT BUT IS PROVIDED WITH ANNULAR GROOVES; THESE SERVE TO TRAP CONTAMINANTS WHICH MAY HAVE STARTED TO PENETRATE THE LIP/COUNTERFACE CONTACT; THE MAXIMUM OPERATING INTERFERENCE FOR THESE SEALS IS +4,8 MM; SHAFT:42.500 IN.; OD:43.688 IN.; WEIGHT:4.250 LBS |
| CPCW | Housing Bore Diameter | 0.937 INCHES NOMINAL |
| CXCY | Part Name Assigned By Controlling Agency | AXIAL CLAMP SEALS CT3 DESIGN |
| MRC | Decoded Requirement | Clear Text Reply |
| ADUC | Seal Width | 1.125 INCHES NOMINAL |