Part No. : AS21151-4C | Alternate P/N : AS211514C | Manufacturer : society of automotive engineers inc |
Item Name: bearing ball rod end | NSN: 3110-01-531-1363 (3110015311363) | CAGE Code: 81343 |
FSC: 3110 Bearings Antifriction Unmounted |
If you require part number AS21151-4C from Society Of Automotive Engineers Inc which is described as a Bearing Ball Rod End component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number AS21151-4C which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110015311363 and was produced under the CAGE Code 81343. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part AS21151-4C today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. AS21151-4C
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-01-531-1363 Item Description: BEARING,BALL,ROD END | 3110 | 015311363 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
AS21151-4C | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
THSD | Thread Series Designator | UNJF |
MDCL | Material Document And Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
MRC | Decoded Requirement | Clear Text Reply |
MATT | Material | STEEL COMP 4130 SHAFT |
STDC | Surface Treatment Document And Classification | QQ-P-416, TY1, CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
ABHP | Overall Length | 1.7505 INCHES MINIMUM AND 1.7805 INCHES MAXIMUM |
MATT | Material | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
ADGA | Overall Outside Diameter | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
CTLK | Self-Alignment Angle | 10.00 DEGREES NOMINAL |
MATT | Material | STEEL COMP 4130 OUTER RING |
MATT | Material | STEEL COMP E52100 BALL |
AGVT | Outer Ring Width | 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM |
STDC | Surface Treatment Document And Classification | QQ-P-416, TY1, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
AAJD | Thread Class | 3A |
AGYJ | Seal Quantity | 2 |
AGZA | Alignment Type | SELF-ALIGNING |
ABXV | Bore Diameter | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
AGVU | Inner Ring Width | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
MDCL | Material Document And Classification | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
AGXH | Length From Bore Center To Shank End | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
SFTT | Surface Treatment | CADMIUM ROD END BODY |
MDCL | Material Document And Classification | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
FEAT | Special Features | NAS513 KEYWAY IN SHANK |
AHAW | Self-Alignment Location | INTERNAL |
CQJX | Nominal Thread Size | 0.375 INCHES |
MATT | Material | STEEL COMP E52100 INNER RING |
AAJF | Thread Direction | RIGHT-HAND |
MDCL | Material Document And Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
ADZG | Lubrication Material | GREASE |
MDCL | Material Document And Classification | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
AGGY | Shank Thread Length | 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM |
SFTT | Surface Treatment | CADMIUM OUTER RING |
AGYW | Bearing Seal Type | CONTACT |
LMDC | Lubrication Material Document And Classification | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
AAZE | Shank Diameter | 0.3750 INCHES NOMINAL |
AAZF | Shank Style | EXTERNALLY THREADED |
CMLP | Thread Quantity Per Inch | 24 |
STYL | Style Designator | DOUBLE ROW, STAGGERED, BALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload