Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : PBP1417-4-13 | Alternate P/N : PBP1417413 | Manufacturer : sps technologies inc |
| Item Name: screw close tolerance | NSN: 5305-01-333-2719 (5305013332719) | CAGE Code: 27624 |
| FSC: 5305 Screws |
If you require part number PBP1417-4-13 from Sps Technologies Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number PBP1417-4-13 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013332719 and was produced under the CAGE Code 27624. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part PBP1417-4-13 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-333-2719 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013332719 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| T009-4-13 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| MATT | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL |
| AASB | FASTENER LENGTH | 1.222 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AGAV | END ITEM IDENTIFICATION | SUPPORT EQUIPMENT SE),B-2 BOMBER AIRCRAFT,B-2 BOMBER ATB) |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions