Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : HR-1/2-X | Alternate P/N : HR12X | Manufacturer : accurate bushing company |
| Item Name: cam follower needle bearing | NSN: 3110-00-003-9350 (3110000039350) | CAGE Code: 07484 |
| FSC: 3110 Bearings Antifriction Unmounted |
If you require part number HR-1/2-X from Accurate Bushing Company which is described as a Cam Follower Needle Bearing component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HR-1/2-X which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110000039350 and was produced under the CAGE Code 07484. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HR-1/2-X today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-003-9350 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING | 3110 | 000039350 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CFH1/2-S | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.2500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.0315 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.5000 INCHES NOMINAL |
| AGRJ | STUD DIAMETER | 0.2500 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.3750 INCHES NOMINAL |
| AGXF | STUD LENGTH | 0.6250 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| FEAT | SPECIAL FEATURES | OIL HOLE IN ROLLER END FOR RELUBRICATION |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYAMIDE SEAL |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL ROLLER |
| MATT | MATERIAL | STEEL STUD |
| MATT | MATERIAL | STEEL WASHER |
| STYL | STYLE DESIGNATOR | CAM FOLLOWER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions