Part No. : 3023T12P04 | Manufacturer : acra aerospace inc | Item Name: packingnut |
NSN: 4730-00-186-2544 (4730001862544) | CAGE Code: 34724 | FSC: 4730 Hose Pipe Tube Lubrication and Railing Fittings |
If you require part number 3023T12P04 from Acra Aerospace Inc which is described as a Packingnut component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3023T12P04 which is listed under the Federal Supply Class 4730 Hose Pipe Tube Lubrication and Railing Fittings. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4730001862544 and was produced under the CAGE Code 34724. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3023T12P04 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3023T12P04
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
4730-00-186-2544 Item Description: Packingnut | 4730 | 001862544 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3023t12p04 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.364 INCHES MINIMUM AND 0.384 INCHES MAXIMUM |
AASG | CASEHARDENING INDICATOR | NOT CASEHARDENED |
ABHP | OVERALL LENGTH | 0.564 INCHES MINIMUM AND 0.584 INCHES MAXIMUM |
ABUJ | THREAD SIZE | 0.750-16 |
AJFY | SEAT ANGLE IN DEG | 45.0 |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNJF |
ASDB | WIDTH ACROSS FLATS | 0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
BBMM | SCREW THREAD LOCATION | EXTERNAL |
BSPX | SMALLEST INSIDE DIAMETER | 0.515 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
FEAT | SPECIAL FEATURES | TWO HOLES DRILLED THRU DRIVE END 0.300 IN.FROM CENTER OF NUT TO CENTER OF HOLE,0.057 IN.MIN,0.062 IN.MAX DIA HOLE;USED ON GRUMMAN AIRCRAFT,MODEL A10 |
MATT | MATERIAL | NICKEL ALLOY 718 |
SFTT | SURFACE TREATMENT | ERR-030 |
STYL | STYLE DESIGNATOR | HEXAGON, EXTERNAL THREAD, INVERTED FLARE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload