Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : AN174H11 | Manufacturer : aeronautical standards group | Item Name: bolt close tolerance |
| NSN: 5306-00-174-4112 (5306001744112) | CAGE Code: 88044 | FSC: 5306 Bolts |
If you require part number AN174H11 from Aeronautical Standards Group which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number AN174H11 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306001744112 and was produced under the CAGE Code 88044. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part AN174H11 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-174-4112 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 001744112 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN174H11 | 2 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.436 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.140 INCHES MINIMUM AND 1.187 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.672 INCHES MINIMUM AND 0.704 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON FLATS |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.984 INCHES MINIMUM FIRST HOLE AND 1.016 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions