AN48-24 by Aeronautical Standards Group With NSN 5306-00-263-7788

Part No. : AN48-24	Alternate P/N : AN4824	Manufacturer : aeronautical standards group
Item Name: bolt eye	NSN: 5306-00-263-7788 (5306002637788)	CAGE Code: 88044
FSC: 5306 Bolts

If you require part number AN48-24 from Aeronautical Standards Group which is described as a Bolt Eye component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number AN48-24 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306002637788 and was produced under the CAGE Code 88044. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part AN48-24 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for AN48-24

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number AN48-24 with NSN 5306-00-263-7788, 5306-00-263-7788

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-00-263-7788 Item PartTypeName: BOLT,EYE	5306	002637788	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
AN48-24	1	2	3

Characteristics Data of NSN 5306-00-263-7788, 5306002637788

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.766 INCHES MINIMUM AND 0.813 INCHES MAXIMUM
AATK	EYE INSIDE DIAMETER	0.438 INCHES MINIMUM AND 0.441 INCHES MAXIMUM
AATP	SHOULDER THICKNESS	0.125 INCHES NOMINAL
AATR	SHANK LENGTH	2.578 INCHES MINIMUM AND 2.625 INCHES MAXIMUM
AAUA	EYE STOCK THICKNESS	0.308 INCHES MINIMUM AND 0.318 INCHES MAXIMUM
AAVH	SHOULDER DIAMETER	1.000 INCHES NOMINAL
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES NOMINAL FIRST HOLE
ABHP	OVERALL LENGTH	3.969 INCHES NOMINAL
AHYM	NOMINAL THREAD DIAMETER	0.500 INCHES
CMLP	THREAD QUANTITY PER INCH	20
CQBC	MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
CTWF	DISTANCE FROM THREADED END TO SHANK HOLE CENTER	2.422 INCHES NOMINAL FIRST HOLE
CWXM	EYE OUTSIDE WIDTH	1.000 INCHES NOMINAL
MATT	MATERIAL	STEEL COMP 4130 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	ROUND,CLOSED W/SHOULDER
THSD	THREAD SERIES DESIGNATOR	UNF

Related NSN Componets for AN48-24

Part AN48-24 With Different Manufacturers

AN48-24

RFQ

If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.

Upload

We are proud to supply every branch of the United States military

Top NSN Parts

view all

Leading NSN Parts Manufacturer