Part No. : 913-414 | Alternate P/N : 913414 | Manufacturer : aerosonic corporation |
Item Name: plate retaining bearing | NSN: 3110-01-191-3528 (3110011913528) | CAGE Code: 98810 |
FSC: 3110 Bearings Antifriction Unmounted |
If you require part number 913-414 from Aerosonic Corporation which is described as a Plate Retaining Bearing component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 913-414 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110011913528 and was produced under the CAGE Code 98810. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 913-414 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 913-414
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-01-191-3528 Item Description: Plate Retaining Bearing | 3110 | 011913528 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
913-414 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABKV | OUTSIDE DIAMETER | 0.700 INCHES NOMINAL |
ABTB | MOUNTING HOLE DIAMETER | 0.102 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
ABVL | APERTURE DIAMETER | 0.248 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
ADPM | BOLT CIRCLE HOLE QUANTITY | 3 |
AFFL | MOUNTING BOLT CIRCLE DIAMETER | 0.500 INCHES NOMINAL |
FEAT | SPECIAL FEATURES | FRIGHT SIDE OF OD MILLED FLAT 0.105 IN. FROM VERTICAL CENTERLINE; TAB ECTENDING FROM MILLED FLAT 0.060 IN.,0.230 IN. WIDE,0.075 IN AB0VE HORIZONTAL CENTERLINE TO 0.155 IN. BELOW HORIZONTAL CENTERLINE |
MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1,CL1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload