Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : HT8140-4-7 | Alternate P/N : HT814047 | Manufacturer : alcoa fastening systems ltd |
| Item Name: screw close tolerance | NSN: 5305-00-281-8118 (5305002818118) | CAGE Code: C4293 |
| FSC: 5305 Screws |
If you require part number HT8140-4-7 from Alcoa Fastening Systems Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HT8140-4-7 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305002818118 and was produced under the CAGE Code C4293. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HT8140-4-7 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-281-8118 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 002818118 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11905-4-7 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.819 INCHES MINIMUM AND 0.866 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions