Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TX1027D3-2A | Alternate P/N : TX1027D32A | Manufacturer : alcoa fastening systems ltd |
| Item Name: screw close tolerance | NSN: 5305-01-417-9049 (5305014179049) | CAGE Code: C4293 |
| FSC: 5305 Screws |
If you require part number TX1027D3-2A from Alcoa Fastening Systems Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1027D3-2A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014179049 and was produced under the CAGE Code C4293. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1027D3-2A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-417-9049 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014179049 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1170D3-2A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE III |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.125 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 2200 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions