Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TX1026C4-13A | Alternate P/N : TX1026C413A | Manufacturer : alcoa fastening systems ltd |
| Item Name: screw close tolerance | NSN: 5305-01-490-6858 (5305014906858) | CAGE Code: C4293 |
| FSC: 5305 Screws |
If you require part number TX1026C4-13A from Alcoa Fastening Systems Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1026C4-13A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014906858 and was produced under the CAGE Code C4293. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1026C4-13A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-490-6858 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014906858 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GS1006C4-13A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | Head Style | FLAT COUNTERSUNK |
| ABQZ | Internal Drive Style | TORX |
| FEAT | Special Features | 125 KSI SHEAR STRENGTH |
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| CMLP | Thread Quantity Per Inch | 28 |
| CXCY | Part Name Assigned By Controlling Agency | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AASA | Thread Length | 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAVA | Point Diameter | 0.425 INCHES NOMINAL |
| AAJF | Thread Direction | RIGHT-HAND |
| MRC | Decoded Requirement | Clear Text Reply |
| AASB | Fastener Length | 1.222 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| AASL | Head Diameter | 0.497 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
| ABQJ | Point Style | FLAT |
| ANEE | Grip Length | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| THSD | Thread Series Designator | UNJF |
| AAUJ | Spline Major Diameter | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AGAV | End Item Identification | F18 E/F AIRCRAFT |
| MDCL | Material Document And Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | Thread Class | 3A |
| AAUR | Grip Diameter | 0.249 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions