Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TX1027C3-5AF | Alternate P/N : TX1027C35AF | Manufacturer : alcoa fastening systems ltd |
| Item Name: screw close tolerance | NSN: 5305-01-512-8411 (5305015128411) | CAGE Code: C4293 |
| FSC: 5305 Screws |
If you require part number TX1027C3-5AF from Alcoa Fastening Systems Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1027C3-5AF which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015128411 and was produced under the CAGE Code C4293. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1027C3-5AF today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-512-8411 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015128411 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GS1014D3-5AF | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | Head Style | FLAT COUNTERSUNK |
| SFTT | Surface Treatment | ALUMINUM OVERALL |
| AHYM | Nominal Thread Diameter | 0.190 INCHES |
| AASB | Fastener Length | 0.643 INCHES MINIMUM AND 0.679 INCHES MAXIMUM |
| CXCY | Part Name Assigned By Controlling Agency | BOLT, 100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS,PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR) |
| AASL | Head Diameter | 0.2931 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| AASA | Thread Length | 0.345 INCHES NOMINAL |
| AGAV | End Item Identification | F-18 E/F |
| AAUR | Grip Diameter | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| CRTL | Criticality Code Justification | AGAV |
| STDC | Surface Treatment Document And Classification | MIL-C-83488,TYPE II,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJF | Thread Direction | RIGHT-HAND |
| FEAT | Special Features | FINISH CETYL ALCOHOL PER MIL-L-87132,TYPE I,GRADE B |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| ABQZ | Internal Drive Style | TORX |
| CMLP | Thread Quantity Per Inch | 3A |
| AAUH | Spline Minor Diameter | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
| THSD | Thread Series Designator | UNJF |
| ANEE | Grip Length | 0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
| MDCL | Material Document And Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAUJ | Spline Major Diameter | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
| MRC | Decoded Requirement | Clear Text Reply |
| AAJD | Thread Class | 3A |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions