Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TX1026C6-20A | Alternate P/N : TX1026C620A | Manufacturer : alcoa fastening systems ltd |
| Item Name: screw close tolerance | NSN: 5305-01-513-8717 (5305015138717) | CAGE Code: C4293 |
| FSC: 5305 Screws |
If you require part number TX1026C6-20A from Alcoa Fastening Systems Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1026C6-20A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015138717 and was produced under the CAGE Code C4293. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1026C6-20A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-513-8717 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015138717 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1026C6-20A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | Grip Diameter | 0.374 INCHES NOMINAL |
| AASK | Head Style | FLAT COUNTERSUNK |
| MRC | Decoded Requirement | Clear Text Reply |
| ABQZ | Internal Drive Style | TORX |
| FEAT | Special Features | 125 KSI SHEAR STRENGTH |
| AHYM | Nominal Thread Diameter | 0.375 INCHES |
| CMLP | Thread Quantity Per Inch | 24 |
| CXCY | Part Name Assigned By Controlling Agency | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AAJF | Thread Direction | RIGHT-HAND |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAVA | Point Diameter | 0.578 INCHES NOMINAL |
| ABQJ | Point Style | FLAT |
| ANEE | Grip Length | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| AASA | Thread Length | 0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM |
| AASL | Head Diameter | 0.749 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| THSD | Thread Series Designator | UNJF |
| AASB | Fastener Length | 1.813 INCHES MINIMUM AND 1.843 INCHES MAXIMUM |
| AAUJ | Spline Major Diameter | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AGAV | End Item Identification | USED ON THE FIGHTER AIRCRAFT-FIRST (F18 E/F) |
| MDCL | Material Document And Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | Thread Class | 3A |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions