Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TX1027D4-17A | Alternate P/N : TX1027D417A | Manufacturer : alcoa fastening systems ltd |
| Item Name: screw close tolerance | NSN: 5305-01-599-1954 (5305015991954) | CAGE Code: C4293 |
| FSC: 5305 Screws |
If you require part number TX1027D4-17A from Alcoa Fastening Systems Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1027D4-17A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015991954 and was produced under the CAGE Code C4293. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1027D4-17A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-599-1954 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015991954 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1027D4-17A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MDCL | Material Document And Classification | PH13-8MOCRES MFR REF 1ST MATERIAL RESPONSE OVERALL |
| MATT | Material | STEEL COMP XM-13 OVERALL |
| AASK | Head Style | FLAT COUNTERSUNK |
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| THSD | Thread Series Designator | UNJF |
| MRC | Decoded Requirement | Clear Text Reply |
| AGAV | End Item Identification | EA6B |
| AAUR | Grip Diameter | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| CQBC | Minimum Tensile Strength | 4400 POUNDS PER SQUARE INCH |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASL | Head Diameter | 0.3859 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM |
| AASB | Fastener Length | 1.1210 INCHES MINIMUM AND 1.1510 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| ABQZ | Internal Drive Style | TORX |
| CMLP | Thread Quantity Per Inch | 28 |
| AASA | Thread Length | 0.735 INCHES NOMINAL |
| AASU | Head Height | 0.060 INCHES MAXIMUM |
| ANEE | Grip Length | 1.1210 NOMINAL MILS AND 1.1510 NOMINAL CENTIMETERS |
| AAUJ | Spline Major Diameter | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions