Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TX27V6-15A | Alternate P/N : TX27V615A | Manufacturer : alcoa fastening systems ltd |
| Item Name: screw close tolerance | NSN: 5305-01-628-4510 (5305016284510) | CAGE Code: C4293 |
| FSC: 5305 Screws |
If you require part number TX27V6-15A from Alcoa Fastening Systems Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX27V6-15A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305016284510 and was produced under the CAGE Code C4293. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX27V6-15A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-628-4510 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 016284510 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11845V6-15A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.578 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.4235 INCHES MINIMUM AND 1.4535 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.5504 INCHES MINIMUM AND 0.5604 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.077 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ABQJ | POINT STYLE | FLAT |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| ANEE | GRIP LENGTH | 0.9375 INCHES NOMINAL |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | -0.2175 TO 0.2175 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CWDK | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - 6AL-4V TITANIUM (95 KKSI SHEAR) |
| MATT | MATERIAL | TITANIUM OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions