Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 4002-10S | Alternate P/N : 400210S | Manufacturer : alcoa fastening systems ltd |
| Item Name: stud assembly turnlock fastener | NSN: 5325-00-839-2277 (5325008392277) | CAGE Code: D0680 |
| FSC: 5325 Fastening Devices |
If you require part number 4002-10S from Alcoa Fastening Systems Ltd which is described as a Stud Assembly Turnlock Fastener component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 4002-10S which is listed under the Federal Supply Class 5325 Fastening Devices. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5325008392277 and was produced under the CAGE Code D0680. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 4002-10S today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5325-00-839-2277 Item PartTypeName: STUD ASSEMBLY,TURNLOCK FASTENER | 5325 | 008392277 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACS21X10CS | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMZ | DIAMETER | 0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM |
| AGRD | TURNLOCK STUD HEAD STYLE | FLAT COUNTERSUNK |
| AGRE | STUD ASSEMBLY STYLE | STUD ASSEMBLY |
| AGRF | DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD | 0.653 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| AKCV | DRIVE TYPE | SLOTTED |
| MATT | MATERIAL | STEEL COMP 302 EJECTOR SPRING |
| MATT | MATERIAL | STEEL COMP 302 PIN |
| MATT | MATERIAL | STEEL COMP 302 STUD |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AGRH | EYELET OUTSIDE DIAMETER | 0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM |
| AGRK | EYELET LENGTH | 0.442 INCHES NOMINAL |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | 0.321 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 305 EYELET |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions