Part No. : 3M1275E3D27A | Manufacturer : alcoa global fasteners inc | Item Name: bolt close tolerance |
NSN: 5306-01-607-2414 (5306016072414) | CAGE Code: 92215 |
If you require part number 3M1275E3D27A from Alcoa Global Fasteners Inc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3M1275E3D27A which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306016072414 and was produced under the CAGE Code 92215. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3M1275E3D27A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3M1275E3D27A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-01-607-2414 Item Description: Bolt Close Tolerance | 5306 | 016072414 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3m1275e3d27a | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
AASB | FASTENER LENGTH | 2.032 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.3729 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM |
AAUB | HOLE DIAMETER | 0.70 INCHES NOMINAL |
AAUR | GRIP DIAMETER | 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 1.677 INCHES MINIMUM AND 1.697 INCHES MAXIMUM |
ASXK | HOLE QUANTITY | 1 |
BQDM | HOLE TYPE | DRILLED |
CMLP | THREAD QUANTITY PER INCH | A32 |
CRHC | HOLE CONFIGURATION STYLE | ROUND INTERNAL TORX |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload