Part No. : 3M1034V4-6-15 | Alternate P/N : 3M1034V4615 | Manufacturer : alcoa global fasteners inc |
Item Name: screw close tolerance | NSN: 5305-01-196-0448 (5305011960448) | CAGE Code: 06950 |
FSC: 5305 Screws |
If you require part number 3M1034V4-6-15 from Alcoa Global Fasteners Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3M1034V4-6-15 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305011960448 and was produced under the CAGE Code 06950. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3M1034V4-6-15 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 3M1034V4-6-15
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-196-0448 Item Description: Screw Close Tolerance | 5305 | 011960448 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3m1034v4-6-15 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 28 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
FEAT | SPECIAL FEATURES | TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.150 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE |
MATT | MATERIAL | TITANIUM ALLOY OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4967,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload