Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : LD111-0045-2516 | Alternate P/N : LD11100452516 | Manufacturer : alcoa global fasteners inc |
| Item Name: screw close tolerance | NSN: 5305-01-412-5356 (5305014125356) | CAGE Code: 06950 |
| FSC: 5305 Screws |
If you require part number LD111-0045-2516 from Alcoa Global Fasteners Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number LD111-0045-2516 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014125356 and was produced under the CAGE Code 06950. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part LD111-0045-2516 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-412-5356 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014125356 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LD111-0045-2516 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | OVERSIZE |
| MDCL | Material Document And Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | Thread Class | 3A |
| AHYM | Nominal Thread Diameter | 0.312 INCHES |
| AASK | Head Style | FLAT COUNTERSUNK |
| ANEE | Grip Length | 1.000 INCHES NOMINAL |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| AASA | Thread Length | 0.467 INCHES NOMINAL |
| AASL | Head Diameter | 0.578 INCHES MINIMUM |
| AASB | Fastener Length | 1.452 INCHES MINIMUM AND 1.482 INCHES MAXIMUM |
| MRC | Decoded Requirement | Clear Text Reply |
| AAJF | Thread Direction | RIGHT-HAND |
| THSD | Thread Series Designator | UNJF |
| AAUR | Grip Diameter | 0.3271 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM |
| CMLP | Thread Quantity Per Inch | 24 |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | Material | STEEL COMP XM-13 OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions