Part No. : TX1026D3-7AF | Alternate P/N : TX1026D37AF | Manufacturer : alcoa global fasteners inc |
Item Name: screw close tolerance | NSN: 5305-01-512-8282 (5305015128282) | CAGE Code: 06950 |
FSC: 5305 Screws |
If you require part number TX1026D3-7AF from Alcoa Global Fasteners Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1026D3-7AF which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015128282 and was produced under the CAGE Code 06950. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1026D3-7AF today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. TX1026D3-7AF
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-512-8282 Item Description: Screw Close Tolerance | 5305 | 015128282 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Tx1026d3-7af | 5 | 8 | E |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
AASB | FASTENER LENGTH | 0.768 INCHES MINIMUM AND 0.798 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.372 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.189 INCHES NOMINAL |
AAVA | POINT DIAMETER | 0.345 INCHES NOMINAL |
ABQJ | POINT STYLE | FLAT |
ABQZ | INTERNAL DRIVE STYLE | TORX |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 32 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload