Part No. : TX1024C4D34-6A | Alternate P/N : TX1024C4D346A | Manufacturer : alcoa global fasteners inc |
Item Name: screw close tolerance | NSN: 5305-01-496-1417 (5305014961417) | CAGE Code: 92215 |
If you require part number TX1024C4D34-6A from Alcoa Global Fasteners Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TX1024C4D34-6A which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014961417 and was produced under the CAGE Code 92215. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TX1024C4D34-6A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. TX1024C4D34-6A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-496-1417 Item Description: Screw Close Tolerance | 5305 | 014961417 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Tx1024c4d34-6a | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.375 INCHES NOMINAL |
AASB | FASTENER LENGTH | 2.485 INCHES MINIMUM AND 2.515 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
AAUB | HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | TORX |
AGAV | END ITEM IDENTIFICATION | F18 E/F |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
ANEE | GRIP LENGTH | 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM |
ASXK | HOLE QUANTITY | 1 |
BQDM | HOLE TYPE | DRILLED |
CMLP | THREAD QUANTITY PER INCH | 28 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR) |
MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload