Part No. : 226-20246 | Alternate P/N : 22620246 | Manufacturer : allied healthcare products inc |
Item Name: screw cap socket head | NSN: 5305-00-716-2193 (5305007162193) | CAGE Code: 62842 |
FSC: 5305 Screws |
If you require part number 226-20246 from Allied Healthcare Products Inc which is described as a Screw Cap Socket Head component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 226-20246 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305007162193 and was produced under the CAGE Code 62842. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 226-20246 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 226-20246
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-716-2193 Item Description: Screw Cap Socket Head | 5305 | 007162193 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
226-20246 | 2 | 9 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.188 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT CHAMFER |
AASL | HEAD DIAMETER | 0.114 INCHES MINIMUM AND 0.118 INCHES MAXIMUM |
AAUH | SPLINE MINOR DIAMETER | 0.049 INCHES NOMINAL |
AAUJ | SPLINE MAJOR DIAMETER | 0.062 INCHES NOMINAL |
AAUK | SPLINE WIDTH | 0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | SIX SPLINE |
AHYM | NOMINAL THREAD DIAMETER | 1.000 INCHES |
CMLP | THREAD QUANTITY PER INCH | 72 |
MATT | MATERIAL | STEEL COMP 303 OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
AASB | FASTENER LENGTH | 0.188 INCHES NOMINAL |
AASU | HEAD HEIGHT | 0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
CQBC | MINIMUM TENSILE STRENGTH | 35000 POUNDS PER SQUARE INCH |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload