Part No. : 945821 | Manufacturer : am general llc | Item Name: shaft straight |
NSN: 3040-00-734-2859 (3040007342859) | CAGE Code: 34623 | FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 945821 from Am General Llc which is described as a Shaft Straight component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 945821 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040007342859 and was produced under the CAGE Code 34623. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 945821 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 945821
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-00-734-2859 Item Description: Shaft Straight | 3040 | 007342859 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
945821 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
AAHN | END SIMILARITY | NOT IDENTICAL |
AAHP | SECOND END STYLE | TWO FLATS |
ABHP | OVERALL LENGTH | 7.719 INCHES NOMINAL |
AMDL | FIRST END DIAMETER | 0.7500 INCHES NOMINAL |
AMDX | FIRST END HOLE DIAMETER | 0.3440 INCHES NOMINAL |
AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 2.156 INCHES NOMINAL |
AMEB | FIRST END HOLE DEPTH | 0.438 INCHES NOMINAL |
CXYR | SECOND END ANGLE BETWEEN FLATS | 180.0 DEGREES NOMINAL |
FEAT | SPECIAL FEATURES | SECOND END HAS FLAT GROOVE WITH DEPTH OF 0.125 IN. NOMINAL,DISTANCE FROM END TO FLAT 2.906 IN. NOMINAL,GROOVED FLAT LENGTH 0.312 IN. NOMINAL;ANOTHER FLAT GROOVE LOCATED APPROXIMATE CENTER OF SHAFT,IDENTICAL TO FIRST FLAT GROOVE DISTANCE BET |
MATT | MATERIAL | STEEL |
AMFZ | SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
CTBM | SECOND END STEP LENGTH | 1.250 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload