Part No. : A1116 | Manufacturer : am general llc | NSN: 2530-00-737-1031 (2530007371031) |
CAGE Code: 34623 |
If you require part number A1116 from Am General Llc which is described as a component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number A1116 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530007371031 and was produced under the CAGE Code 34623. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part A1116 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. A1116
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2530-00-737-1031 Item Description: ARM,STEERING GEAR | 2530 | 007371031 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
GPW3590 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABMZ | DIAMETER | 0.859 INCHES MINIMUM AND 0.864 INCHES MAXIMUM |
ABND | TAPER LENGTH | 0.570 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
ADDX | SERRATION INCLUDED ANGLE IN DEG | 90.0 |
AJLA | TEETH QUANTITY | 36 |
APGF | DESIGN TYPE | OFFSET |
AXND | COUNTERBORE FEATURE | NOT INCLUDED |
CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | 1.620 INCHES NOMINAL |
CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | 0.720 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
CFBT | SECTOR SHAFT MOUNTING END SERRATED BORE | INCLUDED |
CFBW | SMALL END MAJOR DIAMETER | 0.837 INCHES MINIMUM AND 0.839 INCHES MAXIMUM |
CFBY | SMALL END TEETH DEPTH | 0.0348 INCHES NOMINAL |
CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | 4.940 INCHES MINIMUM AND 5.060 INCHES MAXIMUM |
CTKF | TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
CFBX | TEETH CUT ANGLE IN DEG | 1 DEG 37 MIN |
CFBZ | DRAG LINK END CHARACTERISTIC | W/INTEGRAL BALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload