Part No. : SC1708 | Manufacturer : ambac international corporation | Item Name: screw assembled washer |
NSN: 5305-00-022-8295 (5305000228295) | CAGE Code: 01843 | FSC: 5305 Screws |
If you require part number SC1708 from Ambac International Corporation which is described as a Screw Assembled Washer component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number SC1708 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305000228295 and was produced under the CAGE Code 01843. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part SC1708 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. SC1708
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-022-8295 Item Description: Screw Assembled Washer | 5305 | 000228295 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Sc1708 | 2 | 1 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.438 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
AASK | HEAD STYLE | ROUND |
AASL | HEAD DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
AAVW | WASHER QUANTITY | 1 |
ABQZ | INTERNAL DRIVE STYLE | SLOT |
AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM PRIMARY WASHER AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER |
CSPG | PRIMARY WASHER OUTSIDE DIAMETER | 0.270 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
CTHW | PRIMARY WASHER STYLE | FLAT EXTERNAL TEETH |
CTJJ | PRIMARY WASHER MATERIAL THICKNESS | 0.016 INCHES NOMINAL |
MATT | MATERIAL | STEEL COMP 1010 FASTENER |
MATT | MATERIAL | STEEL COMP 1050 PRIMARY WASHER OR STEEL COMP 1566 PRIMARY WASHER |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload